Studio-Garage Stock plans.
Full construction documentation.
$375.00 NZD+GST

BUY NOW_contact us and quote stockplan #


& Dave says...

Double garage with Loft living area over.:- #LG375/100.
$375.00 NZD+ GST

"This is a 100M² design double garage with a level one living area.
Creating a double garage footprint with a small workshop and enclosed laundry space is an exciting project that can be tailored to fit any lifestyle. The first step in the process is to decide on the dimensions of your desired space, which in this case will be 52 square meters. With these measurements, you can plan out exactly how much room you have for each component of your workspace. For example, internal stairs could lead up to level one where 47 square meters are available for custom office setups or additional storage options such as shelving units or cabinets.
The next step would be deciding whether or not a high-pitched roof should be installed; this would help create even more space at the attic while also allowing natural light into the area via skylights – creating cross ventilation throughout all levels of your workspace and improving air quality within it significantly!
Overall by taking time planning out what components need incorporating during construction phases along with selecting appropriate furnishings afterwards - anyone can successfully create their own dream double garage footprint complete with small workshop & enclosed laundry spaces ready for use today!"

 

$375.00:- Studio / Garage (100m²)

Minor dwellings are self-contained units built on the same site as another residential building. Most minor dwellings fall under district plans as a permitted activity. Councils will have different requirements in different areas. You should check with your council whether you will need a resource consent, building consent or both if you are planning to add a minor dwelling to your site.
Drawings provide all the information needed to put together an accurate quote from your builder and convey sufficent detail information for additional Designers / Architects to move forward with pricing or construction....
Specific details to external envelope and foundation as required under the building codes or external consultants recommendation as per Code requirements

The drawing set consists of the following…

1 A0-0 Cover sheet 17 A4-01 Shadowclad_typical cavity garage door details
2 A0-01 Rendered images 18 A4-02 Shadowclad_typical cavity_slab edge door details
3 A0-02 Project legend 19 A4-03 Shadowclad_ typical cavity window details
4 A1-01 Ground floor plan 20 A4-04 Shadowclad_ typical cladding details
5 A1-02 Level one floor plan 21 A4-05 Shadowclad_ typical cavity penetration details
6 A1-03 Garage slab plan 22 A4-06 Steel details
7 A1-04 First floor sub-floor framing plan 23 A4-07 Typical cavity -w/bs_isolated roofing details
8 A1-05 Loft floor framing plan 24 A4-08 Inxternal stair details
9 A1-06 Ground floor bracing plan 25 A4-09 Velux skylight roofing details
10 A1-07 Level one bracing plan 26 A4-10 Bracing desiogn calculation sheets
11 A1-08 Roof plan 27 A4-11 Lumber Lok lintel schedule and fixing data sheets
12 A1-09 Proposed buildable truss plan 28 A4-12 Nailing schedules to sub-floor and roofing as per NZS3604
13 A2-00 Elevtations_North & East      
14 A2-01 Elevtations_South & West      
15 A3-00 Section A &B      
16 A3-00 Section C &D      

The client acknowledges...

You acknowledge our recommendation that you have a LBP Builder / Designer or Architect / Engineer to review the drawing set to provide any site-specific design works if deemed necessary.
The Plans provide ideas and concepts and are not intended to be complete in all respects and details. Variations in standard sizes (e.g., of windows and doors), and brands, thickness, types and uses of different materials can all be changed.
Names of materials and manufacturers shown on the plans do not represent an endorsement or recommendation by the designer. Final selections of materials are the responsibility of you and/or your builder, including proper installation of materials to code requirements.
VizMedia Design has no control or responsibility with respect to such matters.

You as the client agree to consult with a local building official / Builder / LBP or Architect to review the drawing set for further information required prior to submission of the Plans for a building permit or to construct as under the August 2020 NZ Building Act exemptions .
Your right to use the Plans is conditioned on your agreement to, and you affirm that you shall:
(i) consult a locally licensed designer or engineer of your choice prior to beginning construction, and
(ii) strictly comply with all local building codes, zoning requirements, and other applicable laws, regulations, ordinances, and requirements
(iii) Geo-Tech report may or may not be required. This would be determined by your Engineer or LBP. Foundation & bracing design would be related to this if required.

Scroll to Top